At 20:55 on October 24, 2016, the on-duty personnel of the Jilin Old Road Administration Brigade received an emergency call from the 110th Center of Gejiu City and Gao Wei, Chairman of the Red River Detachment Labor Union, to inform him of the occurrence of the K13+470 meter from the second old road to the old direction of Yuanyang. The tanker truck and the passenger bus collided with each other and the traffic was interrupted in both directions. A large number of vehicles and people were left on the site, and there was a phenomenon of oil leakage. The situation was very critical. After receiving the alarm, the old brigade promptly initiated emergency plans for emergency response. Leader Tang Jianrong quickly led the on-duty personnel to the scene. At 21:20, after the road officer arrived at the scene, he immediately set a safety warning sign, and the traffic police department imposed temporary control on the traffic and began to dispose of the scene. Due to the slippery phenomenon of the passenger train on the downside and the improper operation of the driver, collided with the normal tanker on the other side and skidded. The front of the entire bus stopped against the side of the tanker and stopped on the road. , resulting in two-way traffic disruption, a large number of vehicles stranded. Fortunately, the speed was not fast, the collision was not serious and there were no casualties. The ground oil pollution was caused by the splashing caused by the use of a fuel tank in a tanker vehicle. No open flame occurred and the fuel burned. Road officers and traffic police departments evacuated crowds of on-site crowds to appease pedestrians and drivers. They commanded the trailer to separate the two vehicles involved in the accident, ensured that the highway was unidirectional and evacuated as soon as possible. Nearly an hour of dragging, buses and tankers were finally separated and parked on both sides of the road. Road politicians and traffic police will place safety warning signs around the oily road surface, and then release one-way traffic to the vehicles, and command the vehicles to remain in a safe and orderly manner. At the same time, with the old highway branch rescue workers use fine sand to deal with road surface oil pollution, to avoid secondary accidents. After more than two hours of emergencies, the vehicles involved were towed away. Hundreds of vehicles were evacuated in a safe and orderly manner. Oil pollution on the road surface was cleared. The sudden response of the emergency department was handled promptly and properly. The roads, traffic police, highway bureau and other multi-sector linkages, division of labor and cooperation ensured that the accident was handled smoothly, the highway was safe and unimpeded, and there were no casualties. Aluminum Die Casting Electrical Tool Parts are a metal forming process in which molten aluminum metal is put under pressure and injected into a die. Aluminum weighs 1/3 of a comparable steel part. The Aluminum Parts would cost less to ship due to the weight and spend less expense than other manufacturing processes.
Aluminum Die Casting Electrical Tool Parts are lightweight alloys that have good corrosion resistance, mechanical properties, high thermal and electrical conductivity and strength at high temperatures. Aluminum alloys possess high dimensional stability for complex shapes and thin walls.
Aluminum Die Casting Electrical Tool Parts Aluminum Die Casting of Electrical Tool Parts, Aluminum casting of Electrical Tool Parts, Die Casting parts of Electrical Tool NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.bldiecasting.com
