Application:
This cable wire stripper recycling machine is to stripe waste wire cable,then get copper or other metal into it in order to recycle materials.
Description:
This machine has the best and complete function. It has additional 5 rack cutter, double socket line hole. So it is suitable for all kinds of wires, make all kinds of rubber wires easier to strip. And also it can strip single or double core flat wires.
Stripping diameter range is 1-42mm.
This machine has 21 holes, including 13 round wire holes, 2 double holes (can strip double core flat wires), 5 rack cutter holes (can strip RVV), and 1 pressure hole (can strip directly Monofilament line).
Functions and features:
1. Functions and features of the cable stripper machine: Light, low noise, peel and strip, especially for cutting flat wire with soft silk, plug wire and the wire with inner core 2, 3 or 4 roots of round cable which can be stripped easily.
2. Please be sure that the joint parts of the feeding material has been cut off when feeding to avoid damaging the blades of the cable stripper. Before using the cable stripper, please adjust the machine first and debugging, don't start the motor.
3. Please fix and tighten the parts of screw if the out material can be separated. Then start the motor and recognize every parts of the hole and feed it by the root.
4. Comparing with other machine, the cable stripper machine is relatively complex. But if adjusted appropriately, the effect and the benefit are considerable.
5. The blade of the stripper machine should be regulated and grinded as it is. If so the cable stripper can be operated easily.
If the copper wire and rubber or plastic cannot be separated completely, please pay attention as below:
1, Choose the right feeding hole, adjust the positioning fixture via the diameter of cable'
2, Adjust the gap between the drove-gears according to the diameter of cable.
Basically, the gap should be smaller than the diameter of cable.
3, Keep both sides of the long blades to be symmetrical, as well as the long blades and the position of fixture.
Â
Model
918-WSKA
918-WSKOB
918-WSKB
918-WSKB-B-1
Voltage
220V/380V
220V/380V
220V/380V
380V
Motor
2.2KW
2.2KW
4KW
5.5KW
Dimension(mm)
600*580*840
700*610*840
800*580*1200
900*580*1200
Weight
80KG
110KG
200KG
250kg
Capacity(KG/8H)
100-300
600-1500
800-2000
1500-3500
Chopping Range of Diameter
1-35mm
1-42mm
2-98mm
10-165mm
Established in 2006, our company is one professional manufacturer integrating R&D,manufacturing and trading,we are committed to feed machine,pellet machine,hammer mill,grinder mill,briquette machine,snack food extruder machine,coal process machine line,straw briquette machine line,food machine line,farming,agriculture equipments for years.We have 80 staff members and 16 technicians of research team. So we have more competitive strength,advanced processing technology and scientific management.And we are located in Zhengzhou city,Henan province,which is the business and economy center with easy transportation.Our international airport name is Zhengzhou Xinzheng International Airport.
Taking "Sincerity makes trust, Quality wins market"as our business philosophy, Our company always put quality in the first place and meet our customers' needs by ensuring high quality products and the most professional services, Therefore, our products have been exported to almost the whole world and enjoyed a good reputation from our customer for years.
We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success.
Â
          Automatic Electric Copper Wire Stripper stripping Machine
Application:
This cable wire stripper recycling machine is to stripe waste wire cable,then get copper or other metal into it in order to recycle materials.
Description:
This machine has the best and complete function. It has additional 5 rack cutter, double socket line hole. So it is suitable for all kinds of wires, make all kinds of rubber wires easier to strip. And also it can strip single or double core flat wires.
Stripping diameter range is 1-42mm.
This machine has 21 holes, including 13 round wire holes, 2 double holes (can strip double core flat wires), 5 rack cutter holes (can strip RVV), and 1 pressure hole (can strip directly Monofilament line).
Functions and features:
1. Functions and features of the cable stripper machine: Light, low noise, peel and strip, especially for cutting flat wire with soft silk, plug wire and the wire with inner core 2, 3 or 4 roots of round cable which can be stripped easily.
2. Please be sure that the joint parts of the feeding material has been cut off when feeding to avoid damaging the blades of the cable stripper. Before using the cable stripper, please adjust the machine first and debugging, don't start the motor.
3. Please fix and tighten the parts of screw if the out material can be separated. Then start the motor and recognize every parts of the hole and feed it by the root.
4. Comparing with other machine, the cable stripper machine is relatively complex. But if adjusted appropriately, the effect and the benefit are considerable.
5. The blade of the stripper machine should be regulated and grinded as it is. If so the cable stripper can be operated easily.
If the copper wire and rubber or plastic cannot be separated completely, please pay attention as below:
1, Choose the right feeding hole, adjust the positioning fixture via the diameter of cable'
2, Adjust the gap between the drove-gears according to the diameter of cable.
Basically, the gap should be smaller than the diameter of cable.
3, Keep both sides of the long blades to be symmetrical, as well as the long blades and the position of fixture.
Â
Model
918-WSKA
918-WSKOB
918-WSKB
918-WSKB-B-1
Voltage
220V/380V
220V/380V
220V/380V
380V
Motor
2.2KW
2.2KW
4KW
5.5KW
Dimension(mm)
600*580*840
700*610*840
800*580*1200
900*580*1200
Weight
80KG
110KG
200KG
250kg
Capacity(KG/8H)
100-300
600-1500
800-2000
1500-3500
Chopping Range of Diameter
1-35mm
1-42mm
2-98mm
10-165mm
Established in 2006, our company is one professional manufacturer integrating R&D,manufacturing and trading,we are committed to feed machine,pellet machine,hammer mill,grinder mill,briquette machine,snack food extruder machine,coal process machine line,straw briquette machine line,food machine line,farming,agriculture equipments for years.We have 80 staff members and 16 technicians of research team. So we have more competitive strength,advanced processing technology and scientific management.And we are located in Zhengzhou city,Henan province,which is the business and economy center with easy transportation.Our international airport name is Zhengzhou Xinzheng International Airport.
Taking "Sincerity makes trust, Quality wins market"as our business philosophy, Our company always put quality in the first place and meet our customers' needs by ensuring high quality products and the most professional services, Therefore, our products have been exported to almost the whole world and enjoyed a good reputation from our customer for years.
We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success.
Â
Automatic Electric Copper Wire Stripper Stripping Machine
Model NO.: 918-WSKOB
Application: Stripper Waste Cable Wire
Cubic: 0.2-3 Cubics According to Different Models
Precision: Normal Precision
Heating System: Electric
Customized: Non-Customized
Demoulding: No Mold
Function: Stripper Machine
Mould Life: No Mold
Trademark: GMEC
Transport Package: Export Wooden Cases
Specification: ISO, CO, CE, CCC
Origin: Zhengzhou
HS Code: 8474900000
Model NO.: 918-WSKOB
Application: Stripper Waste Cable Wire
Cubic: 0.2-3 Cubics According to Different Models
Precision: Normal Precision
Heating System: Electric
Customized: Non-Customized
Demoulding: No Mold
Function: Stripper Machine
Mould Life: No Mold
Trademark: GMEC
Transport Package: Export Wooden Cases
Specification: ISO, CO, CE, CCC
Origin: Zhengzhou
HS Code: 8474900000
          Automatic Electric Copper Wire Stripper stripping Machine