High Pressure Ceramic Nozzle 95% Alumina Welding Nozzle

October 19, 2022

Model NO.: RY-T116
Transport Package: 10 PCS Per Box
Specification: standard and customized
Origin: China
HS Code: 8481901000
Ceramic Nozzle
Ceramic Welding Nozzles are best material for WIG/TIG welding, plasma welding and cutting.

Techno Cera Welding Nozzles are manufactured using 98% High Alumina. These welding nozzles exhibit high-temperature, high insulation and chemical resistance.

Welding Nozzles are manufactured in various thread sizes like 3/8" BSP, 1/2" BSP, 5/8" BSP, 3/4" UNF and 7/16" BSF and in several nozzle lengths and diameters.
 
Essential components 95Al2O3
Material characteristics Density g/cm3 3.6
Water Absorption   O
Agglomeration temperature   1680
Physical characteristics Hardness HV 1500
AntiFolding Strength Kgf/cm2 3000
Compressive Strength Kgf/cm2 25000
Tenacity Map.m3/2 3-4
 
Model Description Size Φ A mm TIG Torch Photo
14N57 Alumina nozzle 4 6.4 WP-12  
14N58 Alumina nozzle 5 8
14N59 Alumina nozzle 6 9.6
14N60 Alumina nozzle 7 11.2
14N61 Alumina nozzle 8 12.8
14N61-10 Alumina nozzle 10 16
14N61-12 Alumina nozzle 12 19.2

Photos for reference :
High Pressure Ceramic Nozzle 95% Alumina Welding NozzleHigh Pressure Ceramic Nozzle 95% Alumina Welding NozzleHigh Pressure Ceramic Nozzle 95% Alumina Welding Nozzle

Note:All the data is only for reference, specific sizes and hole shapes are according to customers' requirements
 
Enquiries welcomed .
 

Motor End Cover

The die casting process involves the use of a furnace, metal, die casting machine, and die.

The metal, typically a non-ferrous alloy such as aluminium or zinc, is melted in the furnace and then injected into the dies in the die casting machine. After the molten metal is injected into the dies, it rapidly cools and solidifies into the final part, called the casting parts.

The castings that are created in this process can vary greatly in size and weight, ranging from a couple of ounces to 100 pounds. One common application of die-cast parts are housings - thin-walled enclosures, often requiring many ribs and bosses on the interior.

Metal housings for a variety of appliances and equipment are often die cast.

Several automobile components are also manufactured using die casting, including pistons, cylinder heads, and engine blocks. Most home appliances also need lightweight and firm aluminum die casting parts, like bracket, heat dissipation module or structural support. Other common die cast parts include propellers, gears, bushings, pumps, and valves.

Motor End Cover,Washing Motor End Cover,Aluminum Engine Cover,Washing Machine Motor Cover

Ningbo Sunlee Electrical Technology Co. , Ltd. , https://www.nbsunlee.com