FAQ Q:What's the delivery time? A:Normaly will take 60days Q:Do you have after-sale support? A:Yes, we're always here for giving you advice and support for technical details since we have senior technician. Q:Is there quality control when manufacturing the lines? A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging. Q:What's your strength comparing to the other supplier? A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements. Drill bits are cutting tools used to remove material to create holes, almost always of circular cross-section. Drill bits come in many sizes and shapes and can create different kinds of holes in many different materials. In order to create holes drill bits are usually attached to a drill, which powers them to cut through the workpiece, typically by rotation. The drill will grasp the upper end of a bit called the shank in the chuck. Drill Bits,Drill Bit Set,Drill Bit Types,Diamond Drill Bit Shenyang Lubang Railway Maintenance Machinery Co.,Ltd. , https://www.srmfrailwayequip.com
Components for the Machine:
The roll forming machine consists of 8-ton hydraulic uncoiler, infeed guide, embossing rollers, fixed position driven forming stations, cutting equipment, hydraulic station, control console, and manual unload product run out table.
Material Specification
Aluzinc steel and galvanized steel.
Thickness
WLFM51-326.5-980, 0.75 mm to 1.5mm;
WLFM75-300-900, 0.75mm to 1.50mm.
Main Motor Power
22kw (two sections of machine, each secton has one motor with 11kw).
Hydraulic Station Power
7.5kw.
Feeding Width
1000mm
Cover Width
800mm
Steel Stress
G450 ~ G550.
Roll Forming Speed
12 m/minute.
Cutting Tolerance
+/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm).
Hydraulic Uncoiler
Max. capacity: 8'000kgs.
Coil Inner Diameter
508mm.
Voltage
As per customer's request.
Numbers of Stations
26 stations
Type of Cutting
Roll-formed and length-set profile cutting.
Process Sketch
Uncoiling the sheet -Infeed guiding -Roll forming -Measure length - Cutting the panel - Panels to the supporter (option: automatic stacker).
Standard Equipment of Machine
Â
1)
Manual Uncoiler
1 set
2)
Infeed Guide
1 set
3)
Embossing Roller
1 set
4)
Roll Forming Station
1 set
5)
Post-cut Equipment
1 set
6)
Hydraulic Station
1 set
7)
PLC Control Console
1 set
8)
Product Support Table
2 sets
9)
Spare Parts
1 box
Packaging & Shipping
1.One 40ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film;Â
3.Spare parts and some small parts packed in plastic tooling box;Â
4.All Components Fixed by steel wire with Container.
Â
Drill bits come in standard sizes, described in the drill bit sizes article. A comprehensive drill bit and tap size chart lists metric and imperial sized drill bits alongside the required screw tap sizes. There are also certain specialized drill bits that can create holes with a non-circular cross-section.
G550 Steel Sheet Deck Floor Cold Roll Forminig Machine
Model NO.: Deck Floor Roll Forming Machine
Type: Floor Deck Roll Forming Machine
Model Number: Wlfm 60-160-800
Material: Galvanized Steel,Aluzinc Steel
Roller Material: S45c ,45#Steel with Chrome Treatment
Thickness: 0.8-1.2mm
Yield Stress: G450 ~ G550
Max.Forming Speed: 12 M/Min
Main Motor Power: 22
Warranty: 1 Year
After-Sales Service Provided: Engineers Available to Service Machinery Overseas
Trademark: WILLING INT′L
Transport Package: Sea Worthy Fixed by Wire Rope, Wooden Blocks
Specification: CE Standard, ISO 9001-2008
Origin: China R. P
HS Code: 84552210
G550 Steel Sheet Deck Floor Cold Roll Forminig MachineÂ
 Â
A:Yes absolutely. Welcome a lot for your visiting to us.