Drop test machine, drop height: 300-1500mm, designed to test the damage of the product packaging from falling, and to evaluate the impact strength of the transport handling process. Double-column guide, height drop can be set, stable and reliable. (3) Non-packaged products The free fall that may be experienced by the product during handling. The sample is usually dropped from the specified height to the prescribed surface in accordance with the prescribed posture.
Rubber machinery is used to extrude treads, inner tubes, hoses and various rubber strips, as well as to coat cables and wire products. The common one is the screw extruder.
After more than 20 years of continuous development,
Zhejiang jinteng Machinery Manufacturing Co., Ltd. has become a famous
production base and supporting center of screw and barrel for plastic
machinery in China.
Rubber Machinery Screw,Rubber Machine Screw,Black Machine Screws,Mechanical Screw Zhejiang Jinteng Machinery Manufacture Co., Ltd. , https://www.jintengmachine.com
Test procedure The drop test procedure can usually refer to the following steps of a pass test laboratory:
1. Samples should be packed according to the specified method (refer to production instructions or specifications), and accessories must not be left unopened.
2, the test sample can not be less than 2 full boxes or 4PCS finished products.
3, the bottom corner of the seam.
4, pre-test sample preparation.
5, before the test must test the product's function, safety and appearance of the test, determined to be normal after the drop test.
6. If there are special requirements for sealing (such as tapes), proceed as required. If there is no special requirement, the package box is sealed with 2 inches of transparent tape, and the cartoon box is sealed with 3 inches of transparent tape.
7, drop order.
Drop test machine concept The principle of drop test - The package is dropped on a hard, flat surface at a prescribed height, and the ability of the package to withstand vertical impact and the ability of the package to protect the contents are tested. Drop test, also known as drop test/HG-318.
Used to simulate the drop that may be experienced during handling of the product. include:
(1) Repeated free fall that may be experienced during use of connectors, small remote controls, etc. on analog load cables.
(2) The package is dropped
Drop test machine main parameters 1, drop height 2, the number of falls 3, the drop surface is limited by: 1, sample shape 2, height (for free fall)
Drop tester Dongguan Kewen professional production and sales drop tester and other testing equipment, advanced technology, high precision, stable performance, quality assurance, to meet different customer needs