The Welded Mesh Fence adopts low-carbon steel wire, which is beautiful and durable, not easy to deform, easy to install, easy to install, flexible to assemble, and widely used. It can be used on roads, railways, and highways. It can be used for different periods of time according to different column-fixing methods. It can be made into a permanent mesh wall or used as a temporary isolation mesh.
If you are not sure how to determine the column fixing method, you are welcome to consult us at any time.
Dongjie Wire Mesh has a professional technical guidance team that can help you choose the column and Welded Mesh Fence suitable for your use environment.
Welded Mesh Fence,High Security Welded Mesh Fence,Welded Wire Mesh Fence,Galvanized Welded Wire Fence Anping County Dongjie Wiremesh Products Co., Ltd. , https://www.dongjiewiremesh.com
Thin plate cut to length line (0.2-4.0mm)
1. Â Used for metal plate coil uncoiling, leveling, set length, cutting the set size and stacking. This line used for processing cold rolled and hot rolled carbon steel, silicon steel, tinplate, stainless steel and other different kinds of surface plating metal.
 2.   Cut to length line is mainly composed of entry coil car, uncoiler, leveler, looping bridge, side guide, servo feeding device, shearing machine, transfer table, stacking device, etc. This line can configure trimming device.
Â
 3.  This production line Hydraulic system main parts adopt Germany BOSCH-REXROT components and seals, electrical control adopt Japan Mitsubishi PLC program controller and Taiwan WEINVIEW touch screen to control all functions, main motor of leveler adopts AC Broadband motor, Inverter adopts Omron, which has high degree of automation, high shearing precision,stable and reliable performance, Easy operation and maintenance, etc
Parameters
Â
Model No.
Parameter
Coil thickness
(mm)
Coil width
(mm)
Shearing precision/set length (mm)
Shearing speed (pcs/min)/set length (mm)
Coil
weight
(T)
Stacking length (mm)
Remark
HFCL-2×1300
0.2-2
200-1300
±0.5/2000
22pcs/min/2000
10T
500-2000
Technical data, configuration can according to customer requirement.
HFCL-2×1600
0.3-2
200-1300
±0.5/2000
22pcs/min/2000
15T
500-3000
HFCL-3×1600
0.5-3
200-1300
±0.5/2000
20pcs/min/2000
15T
500-3000
HFCL-3×2000
0.5-3
200-1300
±0.5/2000
20pcs/min/2000
15T
500-3000
HFCL-4×1600
1-4
300-1600
±0.5/2000
15pcs/min/2000
20T
500-4000
HFCL-4×2000
1-4
300-1600
±0.5/2000
15pcs/min/2000
20T
500-5000
Thick plate cut to length line (4-22mm)
1. Â Cut to lenth line is used to cut hot-rolled steel coil, stainless steel coil, aluminum coil, cut into various specifications of the size, this line also can have trimming function, make the width size meet customer requirements
2.This cut to length line is composed of entry coil car, uncoiler, material-feeding device, simple leveler, transfer bridge, trimming shearer(optional), leveler, setting length device, plate feeder, cutting device, transfer table, thrower stacking device, Hydraulic system and electric control system
3. Â Â This production line hydraulic system main parts adopt Germany BOSCH-REXROT components and seals, electrical control adopt Japan Mitsubishi PLC program controller and Taiwan WEINVIEW touch screen to control all functions, main motor of leveler adopts high power DC motor, DC controller adopts ETD products, which has high degree of automation, high shearing precision, stable and reliable performance, easy operation and maintenance, etc
 Parameters
Â
Model No./parameter
Coil thickness
(mm)Coil width
(mm)Shearing precision/set length (mm)
Shearing speed (pcs/min)/set length(mm)
Coil weight
(T)Stacking length
(mm)Remark
HFCL-6×2000
1-6
500-2000
±0.8/2000
10pcs/min/2000
30T
500-6000
Technical data, configuration can according to customer requirement.
HFCL-8×2000
2-8
500-2000
±2.5/6000
3pcs/min/6000
30T
500-8000
HFCL-10×2000
2-10
500-2000
±2.5/6000
3pcs/min/6000
30T
500-10000
HFCL-12×2000
3-12
500-2000
±2.5/6000
3pcs/min/6000
35T
500-12000
HFCL-16×2200
4-16
500-2200
±2.5/6000
3pcs/min/6000
35T
500-15000
HFCL-20×2200
4-22
500-2200
±2.5/6000
3pcs/min/6000
35T
500-15000
Machine video linkÂ
https://www.facebook.com/photo.php?v=1681723778734755
Certification
Service
Warranty: 12 months from the date of Bill of Lading.
The Seller shall bear responsibility for the entire machineries normally working during 12 months from the date of Bill of Lading. During warranty period, if are damages and disorders of equipment due to machine quality, The Seller shall be responsible for replacement of the defective parts with new parts. The warranty shall also include performance functions as defined in the offer. In the case that there is any defect The Buyer shall inform The Seller in writing and photos of the broken parts. The Seller will assist and deal with such damages within 15 days from receipt of The Buyer's above information.
The Seller doesn't guarantee the spare parts which are easily worn out / damaged. The Seller deems it his responsibility to furnish The Buyer these spare parts at prices reasonable or agreed.
The Seller doesn't guarantee equipment in case faults caused by operators' improper operation or electric source's breakdown.
Â
Service condition:
1) When Sellers send engineer to Buyer's place for Installation, Commissioning and training for the machine in this contract in Buyer's place, Buyer shall undertake all the relative fees like, all tickets, accommodation for Seller's engineers.
2) Seller shall, within one week of receiving the above information, provide the required and qualified personnel to undertake supervision of installation, commissioning and training.
3) If the Buyer needs the service after sales from Seller, then Buyer shall undertake all the relative fees, like Round Tickets, Accommodation, Internal and international transportation, Labour cost of engineers etc.
4) When the Seller's engineer carries out the services in Buyer's place, Buyer shall arrange a Translator that can speak Chinese for Seller's engineer.
5) Labour cost for engineers: 80.00 USD per person, per day.
Â
FAQ
Q1: Are you a manufacturer or a trader?
A1: We are a professional manufacturer of wire mesh products. We specialize in wire mesh for decades and have accumulated rich experience in this field.
Q2: How to make an inquiry?
A2: You need to provide material, sheet size, wire diameter, hole spacing and quantity for inquiry. Special requirements can also be specified.
Q3: Can you provide free samples?
A3: Yes, we can provide free samples in 20cm-50cm size as well as our catalog. But the courier fee will be on your side. If you place an order, we will refund the courier fee.
Q4: What is your payment term?
A4: In general, our payment term is T/T 30% advance payment, balance 70% against bill of lading copy. We can also discuss other payment terms.
Q5: How about your delivery time?
A5: 1. We always prepare enough stock materials for your urgent needs, and the delivery time for all stock materials is 7 days.
Depending on quantity and technology, you need accurate lead times and production schedules for non-stock items.
Steel Coil Cross Shear Cut to Length Line Machine
Model NO.: HFCL
Speed: 30-80m/Min
Coil Internal Diameter: 508/610mm
Coil External Diameter: 1000-1800mm
Length Measuring: Servo Motor or Encoder
Trademark: HuaFei
Transport Package: Plastic Film Cover or Plywood Case
Specification: according to work piece
Origin: Jinan
Steel coil cross shear cut to length line machine for uncoiling leveling shearing stacking