Nickel-based alloy powders are commonly used in plasma transfer arc welding (PTAW) due to their excellent corrosion resistance, high temperature strength, and good weldability. These alloys are typically composed of nickel as the base metal, with various alloying elements added to enhance specific properties. Inconel Powder,Nickel Powder,Pta Welding Ni Alloy Powder,Laser Cladding Ni Base Powder Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcmetalpowder.com
A. Size: per drawing
B. Material: Brass etc
C. Finish: burrs removing
D. MOQ: 1000PCS
E. Sample lead time: 15days
Similar Products:(Per drawing)
 Machining basic parameters
1
Material
copper, aluminum, iron, stainless steel, 45 #, POM and other environmental friendly materials
2
Specifications
M1.0-M15, the maximum diameter of machining is 30MM, and the largest diameter of casting is 790MM.
3
Surface Treatment
white zinc, yellow zinc nickel, copper, chromium, tin, gold, silver, etc.
4
Tolerance
Outer diameter tolerance +/- 0.01mm;Â Â Â Length tolerance +/- 0.01mm
Threads can be checked by go-and-not-go-gauge.
5
Processing Methods
manufacture of blue drawing, sample and raw material
  Production equipment
Â
 Detection Device
Certificate
FAQ
1.Are you a manufacturer?
---Yes, we are. Warmly welcome to visit our factory at any time.
---We can according to your usage and design the hardware for you. Also can according to you drawing.
---We can give you best design and save more cost for you.
2.How does the ADL control the quality?
---During processing, the operating machine worker inspect the each sizes by themselves.
---After finished the first whole part, will show to QA for full inspection.
---Before shipment, the QA will inspect according to ISO sampling inspection standard for mass production.
---Inspection equipment: Hardness test, salt spray endurance test, mechanical sizes test, RoHS report, Â Â certificate of material and etc as per your need.
3.What's the payment term?
---100% T/T in advance normally; 50% deposit, 50% balance by T/T before shipment when order amount over 5000USD.
4.What's the delivery time?
---Normal, 7-15 working days for sample. 12-30 working days for mass production.
--If any urgent parts, we can provide preferential processing and control the delivery time as you required.
5.What is the standard of package?
---Inner is PP bag or separate Blister plastic box, keep no scratch and damage.out is carton. Then pallet. Carton size: 23*23*16, and pallet size is: 100*100*50, or as your requirement.
6.Can we get some sample?
---Sample can be provided, The clients will bear the shipping cost. The Sample cost is about 100-500 USD for each part, And it will be refund after order the mass production.
Product Name: Copper Alloy Metal Hardware CNC Turning Parts(CNC-08)
A. Size: per drawing
B. Material: Brass etc
C. Finish: burrs removing
D. MOQ: 1000PCS
E. Sample lead time: 15days
Similar Products:(Per drawing)
 Machining basic parameters
1
Material
copper, aluminum, iron, stainless steel, 45 #, POM and other environmental friendly materials
2
Specifications
M1.0-M15, the maximum diameter of machining is 30MM, and the largest diameter of casting is 790MM.
3
Surface Treatment
white zinc, yellow zinc nickel, copper, chromium, tin, gold, silver, etc.
4
Tolerance
Outer diameter tolerance +/- 0.01mm;Â Â Â Length tolerance +/- 0.01mm
Threads can be checked by go-and-not-go-gauge.
5
Processing Methods
manufacture of blue drawing, sample and raw material
  Production equipment
Â
 Detection Device
Certificate
FAQ
1.Are you a manufacturer?
---Yes, we are. Warmly welcome to visit our factory at any time.
---We can according to your usage and design the hardware for you. Also can according to you drawing.
---We can give you best design and save more cost for you.
2.How does the ADL control the quality?
---During processing, the operating machine worker inspect the each sizes by themselves.
---After finished the first whole part, will show to QA for full inspection.
---Before shipment, the QA will inspect according to ISO sampling inspection standard for mass production.
---Inspection equipment: Hardness test, salt spray endurance test, mechanical sizes test, RoHS report, Â Â certificate of material and etc as per your need.
3.What's the payment term?
---100% T/T in advance normally; 50% deposit, 50% balance by T/T before shipment when order amount over 5000USD.
4.What's the delivery time?
---Normal, 7-15 working days for sample. 12-30 working days for mass production.
--If any urgent parts, we can provide preferential processing and control the delivery time as you required.
5.What is the standard of package?
---Inner is PP bag or separate Blister plastic box, keep no scratch and damage.out is carton. Then pallet. Carton size: 23*23*16, and pallet size is: 100*100*50, or as your requirement.
6.Can we get some sample?
---Sample can be provided, The clients will bear the shipping cost. The Sample cost is about 100-500 USD for each part, And it will be refund after order the mass production.
Some commonly used nickel-based alloy powders for PTAW include:
1. Inconel 625: This alloy powder is widely used for PTAW due to its high strength, excellent resistance to corrosion, and oxidation at elevated temperatures. It is commonly used in applications involving seawater, chemical processing, and aerospace industries.
2. Hastelloy X: This alloy powder is known for its high-temperature strength and oxidation resistance. It is commonly used in applications involving gas turbine engines, industrial furnace components, and chemical processing.
3. Monel 400: This alloy powder is known for its excellent resistance to corrosion, particularly in marine environments. It is commonly used in applications involving seawater, chemical processing, and oil refining.
4. Inconel 718: This alloy powder is known for its high strength, excellent resistance to corrosion, and good weldability. It is commonly used in applications involving aerospace, oil and gas, and nuclear industries.
5. Inconel 601: This alloy powder is known for its excellent resistance to high-temperature oxidation and corrosion. It is commonly used in applications involving heat treatment equipment, chemical processing, and power generation.
These nickel-based alloy powders can be used in PTAW processes to create high-quality welds with excellent mechanical properties and resistance to corrosion and high temperatures.
Copper Alloy Metal Hardware CNC Turning Parts
Model NO.: cnc-08
Quality Control: 100% Full Inspection
Tolerance:Â : High Precision:+/-0.005mm
Surface Treatment:Â : Anodized
CNC Parts Customized:Â : Accept
Application Industry:Â : Automation, Aerospace, Medical
Processing:Â : CNC Milling, Drilling, Anodized
Quality Certificate:Â : ISO9001:2008; SGS; RoHS
Delivery Time:Â : 8-15 Working Days
Trademark: OEM
Transport Package: According to Customer`S Requirement
Specification: Customized
Origin: Guangdong, China (Mainland)
Model NO.: cnc-08
Quality Control: 100% Full Inspection
Tolerance:Â : High Precision:+/-0.005mm
Surface Treatment:Â : Anodized
CNC Parts Customized:Â : Accept
Application Industry:Â : Automation, Aerospace, Medical
Processing:Â : CNC Milling, Drilling, Anodized
Quality Certificate:Â : ISO9001:2008; SGS; RoHS
Delivery Time:Â : 8-15 Working Days
Trademark: OEM
Transport Package: According to Customer`S Requirement
Specification: Customized
Origin: Guangdong, China (Mainland)
Product Name: Copper Alloy Metal Hardware CNC Turning Parts(CNC-08)