The reason for this recall is that due to the instability of the gearbox automatic assembly system, the insertion step of the parking pawl guide bushing on some of the affected vehicles may be omitted and not installed. If the transmission is repeatedly used in the event of missing pins, the parking function may be lost. Even if the gear and the dashboard indicate that the vehicle has been engaged in the P position, when the driver stops and stops, the instrument panel cannot warn that the vehicle is not correctly engaged in the P position. If parking brake is not applied, it may cause accidental movement of the vehicle in extreme cases, which may cause safety problems. Ford China's authorized dealers will check the presence of vehicles within the scope of the recall of the transmission parking pawl guide bushings for defects, and install roll pins as needed to eliminate hidden dangers. Inventory vehicles will also be sold after eliminating hidden dangers.
Since the height of the filling is close to the tower top, the water eliminator does not occupy much space, and the overall height of the cross-flow tower is small, which makes it relatively compact compared with counter flow type, and therefore lower air inlet speed and power consumption as well.
The cross-flow tower adopts a water distribution system that will let the water drop fall naturally by gravity. Thereby, water distribution holes are not easy to be blocked, as water distribution is even and maximizes the performance of the tower fillings. The inspection manhole also enables routinely maintenance without machine shutdown.
A lower part of the cross-flow tower filling is submerged in the water, so that the water flows through the surface of the filling and directly falls into the below tank, making low noise.
The cross-flow tower fan is located in the middle of the Cooling Tower, while the filling, on both sides of the tower. So the amount of splashing water is very small.
Cross Flow Cooling Tower,Cooling Tower Cools Water,Induced Draught Cooling Tower,Induced Draft Cross Flow Cooling Tower Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.heatexchangerjm.com
It was learned from the Defective Product Management Center of the State Market Supervision and Administration Bureau that a few days ago, Ford Motor Co., Ltd. (hereinafter referred to as Ford China) had filed a recall plan, due to the safety hazard of the transmission's parking pawl from May 18, 2018. , The recalled 2017 models were imported with one Ford F-150 Raptor model and the 2018 model with a Ford Mustang 2.3T performance model car. 