Forged Ring,Stainless Steel Ring,Rolled Aluminum Rings,Aluminum Forged Rings Suzhou SNK Machinery Equipment Co.,LTD , https://www1.snkforging.com
Inverted bucket steam trap
Reverse bucket steam trap is a mechanical steam trap in one of the most solid steam trap, its advantages are: not afraid of water hammer, continuous row of non-condensable gases, good anti-fouling performance; maximum back pressure ≤ 80%, all Inner parts are made of stainless steel, wear-resistant, corrosion-resistant; spherical valve seat and the valve seat is line contact, sealing performance, long service life; intermittent drainage and continuous drainage, can row close to the saturation temperature of condensate, heating equipment to achieve Best work efficiency. The inverted bucket steam trap valve seat is under the protection of water seal, no live steam leakage, energy saving effect is good. It applies to petroleum, chemical, printing, paper, pharmaceutical and other industrial steam heating equipment and steam pipe network of steam drainage. Reverse bucket bucket trap inverted bucket steam trap It is the use of condensed water and steam density difference principle of work, the internal structure is connected by the lever system upside down bucket to overcome the steam pressure switch inverted bucket trap inside is an inverted bucket is Level sensitive parts, inverted bucket opening down. When the device is started, air and low temperature condensate appear in the pipe. At this time, the trap is fully open, and the air and low temperature condensate are quickly discharged, and the device quickly raises the temperature. When steam enters the inverted bucket, the inverted bucket produces upward buoyancy, and the inverted bucket connects the lever to drive the valve to close the valve. Inverted bucket has a small hole to open the air automatically, as part of the steam discharged from the hole, the other part of the steam condensate, inverted bucket loses its buoyancy to sink, inverted bucket connected to the valve lever to open the valve lever. When the steam into the inverted bucket again, the valve closed again, work cycle, intermittent drainage.