Dongfeng Capt blue wrecker Chassis configuration: Capt D6 series, driving width 1730, sheep fat white, single row, engine light hair D28D10-4DA, 85KW/115 horsepower, 5 files, frame 192mm, front and rear axle 1.8/3.5t, 7.00 wire tire, Rotating, air brake, clutch assist, flat plate length 4.2 meters, tail plate 800mm, width 2.3 meters, double side linkage operation, full hydraulic flip board, 4 tons hydraulic winch, 21 meters thick steel rope, 4 straps, yellow Police lights, shouting microphones, alarms. Optional rear arm. Optional rear arm. Total mass (Kg) 4495 Tank volume (m3) Rated load mass (Kg) Dimensions (mm) 5995×2300×2350 Curb weight (Kg) 3620, 3555 Cargo size (mm) × × Rated passenger (person) Quasi-trailer total mass (Kg) Number of passengers in the cab (person) 2,3 Load mass utilization factor Approach angle / departure angle (°) 19/13 Front overhang / rear overhang (mm) 1032/1663 Number of axes 2 Wheelbase (mm) 3300 Axial load (Kg) 1800/2695 Maximum speed (Km/h) 95 Other optional cabs are available with the chassis. Optional swing arm plate unit and rear block plate. Lifting weight: 745kg; protective device material: Q235, connection method: bolted connection; due to the special structure of the vehicle, there is no need to install the rear lower guard. ABS system manufacturer / model: Dongfeng Electronic Technology Co., Ltd. Automotive Brake System Company / 36JD01-30010. (This article is from Xiagong Chusheng)
Storage Rack Roll Forming Machine is divided into two parts: upright and beam. It includes one decoiler, servo feeding, hydraulic punching, roll forming machine and hydraulic cutting. The products of the rack roll forming machine are used as racks and shelves for supporting the daily commodities in supermarkets and shops.
Specification:
Decoiler - Servo roller leveling - Servo feeding - Power press - Material guiding - Main roll forming machine - PLC control system - Hydraulic cutting - Receiving platform
Pictures of machine:
Training and Installation : Storage Rack Roll Forming Machine Storage Rack Roll Forming Machine,Storage Beam Roll Forming Machine,Storage Upright Roll Forming Machine,Hydraulic Storage Rack Roll Forming Machine YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyee.cn
Matching material
Color steel plate, Galvanized, PPGI, Aluminum
Material thickness range
1.5-3mm
Main motor power
15KW
Hydraulic power
11KW
Forming speed
6-8m/min(include punching)
Rollers
18-24
Material of rollers
45# steel with chromed
Shaft material and diameter
80mm, material is 40Cr
Way of driven
Chain transmission or Gear box
Controlling system
Siemens PLC
Voltage
380V/3Phase/50Hz
Material of blade
Cr12 mould steel with quenched treatment 58-62℃
Total weight
about 15 tons
Size of the machine
L*W*H 12m*2.0m*1.6m
Working process:
1. We offer installation service local in paid, reasonable charge.
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation.
Certification and after service:
1. Match the technology standard, ISO producing certification
2. CE certification
3. 12 months warranty since the delivery. Board.
Our advantage:
1. Short delivery period.
2. Effective communication
3. Interface customized.