The conveyor belt of the belt conveyor moves according to the principle of friction transmission. It has large conveying capacity, long conveying distance, stable transportation, no relative movement between material and conveyor belt, low noise, simple structure, convenient maintenance, low energy consumption, standardization of components, etc. advantages, which belt conveyor is widely used in mining, metallurgy, chemical, foundry, building materials industries such as transport and production lines and construction sites and port sectors such as hydropower production, used to transport loose materials or items, according to transportation technology requirements It can be transported by single or multiple belt conveyors or with other conveying equipment to form a horizontal or inclined conveying system to meet the needs of different layouts. The belt conveyor can be used in the ambient temperature range of -20 ° C to +40 ° C, and the temperature of the conveyed material is below 50 ° C. Tape conveyor product features:
Aluminum Die Casting Automobile AC Compressor Comp FEATURES:
During the process of die casting, molten metal is injected into two parts of a shape (the die), which are stuck together. The metal is injected under high pressure. After it has cooled, the two parts of the die come loose and the part is removed. Because the same die is used again and again, each part comes out looking exactly the same. The process of designing the die is the only technically difficult part of the operation. A lot of factors have to be considered to make sure that no air gets trapped inside the molten metal when it is injected and calculations on the draft angle have to be made to make it possible for the part to be ejected easily. This process is used in almost every industry in the world and it is unlikely that you are not surrounded by items right now that have been created through a die casting process.
• Strength and weight – Thin wall castings of die cast Automotive Parts are stronger and lighter than those possible with other casting methods. Plus, because die castings do not consist of separate parts welded or fastened together, the strength of automotive components after die casting is that of the alloy rather than the joining process. Automobile AC Compressor Comp Automobile AC Compressor Comp,AC Air Conditioning Compressor,Auto AC Compressor,AC Compressor For Comp Zheke Mould Technology Co. Ltd. , http://www.zkdiecasting.com
1. The tape conveyor consumes less energy;
2, the tape conveyor is light in weight;
3. The belt conveyor has a long service life;
4, the belt conveyor maintenance costs are low;
5. The belt conveyor is stable in transportation and reliable in operation;
6. The belt conveyor has low starting power and can be started directly at full load;
7. The belt conveyor has high conveying capacity;
8, the tape conveyor is suitable for sealing, less pollution;
• Multiple finishing techniques – Die cast automotive parts can be produced with smooth or textured surfaces, and they are easily plated or finished with a minimum of surface preparation.