On November 27th , the most anticipated construction machinery exhibition in Shanghai in 2018 was grandly opened. The new Kobelco construction machine took the new generation SK210D-10 multi - function dismantling machine and made a heavy debut. It was intended to scrap the car and dismantle it. The scrap car dismantling industry provides more powerful tools and equipment. Once the products are on display, they have attracted a lot of attention from the industry and domestic and foreign customers. The people who came to the booth have been in constant stream!

The new generation SK210D-10 multi - function dismantling machine realizes the rapid disintegration of scrapped vehicles through the cooperation of hydraulic shears and clamping arms. The original factory development ensures the optimal matching and efficient operation of the working device and the main machine, not only has low fuel consumption. High durability and comfort.

New generation SK210D-10 multi - function dismantling machine

1.KV800PR hydraulic shear has strong gripping force, shearing force and rotating torque;

2. The multi-function clamp arm has both pressing and opening and closing functions. The front end of the clamp arm is equipped with a front end tooth for harness separation and metal bending, and the inside of the clamp arm is equipped with a spherical handle for lateral fixation and a cutting for splitting. tooth;

3. The arm cylinder and the bucket cylinder are both reinforced cylinders for disassembling the machine; the boom cylinder is provided with cylinder piston guards to prevent splashing of the iron;

4. The incremental weight is used at the tail, and the total mass of the whole machine reaches 30.3 tons;

Compared with the previous SK200-8 disintegration machine, the new generation SK210D-10 disintegration machine has the following differences:

1. The system is equipped with ECO mode, and the fuel consumption of the same working condition is reduced by 16%-19% ;

2. The size arm and the upper and lower frames are all structurally enhanced;

3. An angle sensing device is added to the front end of the arm, the front part of the boom and the rear end of the boom. Once the hydraulic shear enters the dangerous area, it will automatically stop. At the same time, the rear camera and the one-way calling device are added to ensure the safety of the on-site operation;

4. The cab is equipped with a shock absorption system, the vibration is reduced by 35% , the operating handle load is reduced by 38% , and the driving cabin is pressurized by 75pa ; effectively reducing the driver's fatigue strength.

Low fuel consumption performance continues to evolve  

Compared with the H mode /S mode of the previous model ( 9 -type machine), the new SK210D-10 multi - function dismantling machine reduces the fuel consumption by about 15% , which is reduced compared with the environmental model of the previous model. Approximately 23% of fuel consumption, achieving ultra-low fuel consumption performance. The innovative boom / arm regeneration system uses the weight of the boom to transform into the force of the arm when the boom is lowered, thus forming a hydraulic regeneration circuit. Moreover, the hydraulic circuit design that controls energy loss improves fuel consumption.

New generation SK210D-10 multi - function dismantling machine

High durability and continuous uninterrupted operation

The so-called high durability means long-lasting operation and excellent durability. Equipped with a new IT prevention and preservation function to prevent mechanical failures and provide uninterrupted products to the global job site. From the structural design, we will strengthen the reduction of mechanical failure. The life expectancy is about 1.5 times that of the original organic type, which guarantees high operation. The boom becomes thicker and more powerful. Thickened iron plates and shaft seats have also evolved into an integrated structure. Enhanced visualization is achieved. The large-section structure increases the height of the section of the heavy arm stress load. The thick plate structure replaces the conventional reinforcing plate and thickens the thickness of the plate itself. The shaft base with the bottom end of the ear adopts an integrated structure with ears in the part of the shaft seat where the stress is concentrated. Disperses maximum stress and improves durability.

New generation SK210D-10 multi - function dismantling machine

Newly designed cab construction is safer and more comfortable

In addition to ensuring high safety, the newly designed cab also uses a large-capacity air conditioner. By changing the position of the air outlet, the air outlet directly faces the operator, and the efficiency of the air conditioner is improved, making it possible to achieve comfortable work. The maintenance of the airframe becomes safer and easier to operate, and the space for the operator is ensured when the engine room is maintained. By reducing the height of the pedals, it is easy to lift and lower, and it can be operated without bending over. At the same time, the weight of the hood is reduced and it becomes easy to switch. The handle adopts a lifting and blocking handle, which makes the operation of the handle easier, reduces the load of the handle operation, and reduces the fatigue of the operator for a long time.

Safety construction guarantee system to ensure the safety of the operator

At the excavation construction site, accidents with a relatively high frequency are generally pinched and injured. The careful operation of the hands will also have great intentions, and the safety construction guarantee system developed by Xinshen Steel Construction Machinery is to completely suppress the occurrence of these accidents and is committed to reducing the accident rate to zero. The equipment equipped with this system, when detecting the people and obstacles in the dead zone during the rotation and retreat of the excavator, notifys through the display or through the alarm system, and automatically decelerates and stops the operation. The system is equipped with a detection area that combines safety and operability. Regardless of the day or night, people or obstacles can be detected by depth sensors. In the future, the equipment will automatically slow down and stop when it encounters the situation, completely preventing accidents.

Intelligent construction navigation system is comparable to skilled masters

The system has practical GPS positioning information, which can display the position and orientation of the construction machinery and the position of the tooth on the control panel, helping the operator to accurately navigate the excavation work to meet the design requirements. In the work of leveling the ground work and the horizontal stretching of the bucket, the surface finishing, the angled trench leveling operation, etc., only relying on the simple arm handle can be operated, and anyone can achieve as much as skill. The efficiency of the operator's work. The intelligent construction navigation system allows you to get the least amount of workman and get high precision construction.

In addition, the Kobelco Construction Machinery booth also exhibited two specially-painted commemorative models, which are cool and attractive. Many users have stopped to take photos.

All along, Xinshen Steel Construction Machinery has always regarded “symbiosis with the environment” as an important mission of product research and development. Since 1979 , the world's first scrapped car disintegration machine has been launched. After 39 years of continuous technological innovation and upgrading, the total sales volume has exceeded 1,200 units. It is believed that the new generation SK210D-10 will better serve the scrap car dismantling site in China. !