Universal Tool Grinding Machine Universal Tool Grinding Machine,Belt Grinder Attachment For Bench Grinder,Universal Grinder,Tool Grinder WEISS MACHINERY CO., LTD. , https://www.weissmachinerys.com If the mixer owner finds a water leak in the water box, he can go to the repair shop to check it out and change the new water box. If the water leakage still exists, the owner should think about it.
1. Check whether the box cover of the mixer car can be fastened beforehand
2. Test the gas filling into the water box and see where the water in the water box is seeping when it is pressurized, and then make a resolution plan;
3. Unscrew the lid of the mixing truck and add the engine oil to see if there is any residue of the emulsified oil. If there is, remove the cylinder pad from the engine.
4. If the vehicle is running in a mixing vehicle, if the road is difficult to go and the vehicle is oscillated too much and the water tanks of the water tank are leaking and leaking, the treatment method can be adopted according to the state of care: if the leakage does not exceed 1mm crack or 2mm hole, , Add a bottle of water to the box containing water to force the leaking agent to initiate transportation operations.
For water tanks, the heat pipe leakage is severe, and the leaking heat pipe can be cut off from the leak. Block the cut heat pipe with an alkaloid-coated grass ball, and cut the heat pipe head with pliers. Flattened and then crimped to stop leaking
When the rubber joint of the mixer truck leaks, use the screwdriver to wrap the hose joint clamp around the hose joint and then tighten it with pliers. If the rubber hose is damaged, use a piece of tape to tie the cracked part and temporarily use it for luck.
Concrete mixer--How to deal with the leakage of water tank
Turn on the cooling water and start 5~10 minutes after the big cycle. In the cooling system of the mixer, no matter whether it is the water box, the rubber tube or the pad everywhere, there will be leakage at the leaking point, the leakage will not need to be released, and the heat dissipation will not be affected. Even if the mixer does not contain a leakage agent, the small leakage of the individual heat pipes can be used to put the loose tobacco into the water box within a short period of time. Apply water circulation pressure to make the tobacco pipe plug in the water leakage of the heat pipe. Department of temporary luck. Cement mixer price