PTFE coated fiberglass fabric cloth is made by taking high quality imported glass fiber as weaving material. The basic material is weaved specially into senior glass fiber cloth substrate. Then, by unique technology such as full immersion, impregnation, coating the cloth with PTFE, different thickness and width of PTFE cloth is finally produced.
High temperature resistant PTFE fabrics provide non-stick surface under low and high temperature from -100° to +260° F , basic fiberglass fabric is light weight and strong, it has a low coefficient of thermal expansion and relatively high thermal conductivity, PTFE coating turn its surface into a non-stick surface which makes this composite material perfect for hot sealing, heat pressing, mold releasing and stamping.
Features of PTFE coated fiberglass cloth:
1. stable dimension, high intensity, elongation coefficient less 5‰
2. good temperature resistance, 24 hours working temperature -70-260ºC
3. low coefficient of friction and dielectric constant, good insulating ability
4. Non-sticky, easy to clear stains and adhesives on the surface
5. good chemical resistance, it can resist all most of chemical medicines, acids, alkalis, and salt, it is fireproof, lower in aging.
PTFE Fiberglass Cloth,PTFE Coated Glass fiber Cloth,PTFE Coated Fiberglass Cloth,PTFE Coated Fiberglass Fabric Taizhou Kaicheng Synthetic Material Co.,Ltd , https://www.kc-ptfefabrics.com
First, users do not understand the situation of the instrument, do not arbitrarily disassemble, replace the alarm sensor, gas calibration before leaving the factory, replace, then need to re-calibration. If there is a problem with the problem, it must be operated by a professional.
Second, the detector avoids high concentrations of gas impact, so that the detector is easy to poison; avoid frequent power off, if the power is not stable, it is easy to damage the instrument. Wipe the detector frequently to prevent dust from clogging the sensor.
Third, the detector should be calibrated regularly: the necessity of the detector calibration, to prevent the detector detection data from drifting, and to increase the accuracy of the detector data. The detectors are regularly calibrated, the components are protected and the service life is long. The detector calibration is generally performed after one or six months, depending on the site detection environment.
In short: Industrial gas alarm detection environment is generally affected by dust, corrosive gases and other related effects, the environment is relatively poor, so the user when using the alarm should be carried out from time to time, in order to maximize alarm detection efficiency and long service life Some, reduce the cost of use
How to make gas alarm use longer
Whether it is a fixed alarm or hand-held portable gas detector, users should know that the safety instrument has a certain service life, how to make the instrument use a longer life, the instrument to play the greatest effect of detection, the instrument should be used when What do you notice?