In the actual work, after the camera is installed, it is used well, and suddenly dropped the line. After a while, it went online again, and then you didn't pay attention and inexplicably dropped the line. We are very annoyed. How to solve the problem that network cameras or network devices are frequently dropped?
First, check whether the power supply of the device itself is stable and reliable, and whether the device is continuously restarted due to the power supply of the device itself.
Second, check the switch to which the dropped device is connected. In particular, if the camera is dropped in batches, first consider whether the switch itself is faulty and the device is offline.
Third, check the length of the dropped device to the network cable of the switch. If the network cable exceeds 100 meters, you need to consider whether the device is dropped due to the transmission distance of the network cable.
Fourth, check the quality of the network cable and the quality of the crystal head. In the actual project, we have encountered the situation that the cable transmission is only 60 meters away, and the camera frequently drops the cable. The reason may be that the quality of the cable connector is not good, the cable connector wire sequence error and the quality of the cable itself are unqualified.
Fifth, check if there is a software failure caused by the device dropped. For example, the software gives an error command and the software process stops the service.
Finally, if the above reasons are excluded, consider whether it is a malfunction of the camera itself.
Ceramic Seal Faces
Seal face is a typical and classical sealing form. Due to SiC, AL2O3 ceramic have superior hardness, anti-wear, anti-chemical, resistant high tempreture and pressure and low friction with self-lubrication characteristics. It have been recognized a excellent material for seal face.
Ceramic seal face work as a sealing component through a fine finish treatment surface with greatest ideal flatness, very smooth working sides. Commonly, it used in some water pump, oil pump, centrifuge.
We offer prototyping service, also high volume production capability. Whatever you need a very small batch for R&D, or cost down project with high volume. It will be warmly welcome.
Ceramic Seal Faces,Ceramic Mechanical Seal Faces,Carbon Ceramic Seal Faces,High Polishing Ceramic Seal Faces
Jinghui Industry Ltd. , https://www.industrialcerams.com