The year 2010 is the most complicated year for the international and domestic economic situation faced by the machinery industry. Under the guidance of a series of correct measures of the country, the economic operation of the industry has maintained a steady and rapid growth, and the major indicators of economic efficiency have been fully satisfactory. While the industry from "restorative growth" to "recovery and growth", some industries have achieved extraordinary development, and there has been a good momentum of technological advancement, independent innovation, and the development of high-end equipment support industries.

According to the latest statistical results, in 2010, the industry's production and sales achieved an increase of more than 30%, a record high. The growth in production and sales of the construction machinery and machine tool industry was outstanding, and the export delivery value showed a recovery growth. The scale of import and export trade continued. expand. In the monthly output of 119 kinds of major products of the China Machinery Industry Federation, the accumulated year-on-year increase accounted for 89.92% of all reported product varieties.

Looking ahead to 2011, the economic operation of the machinery industry is expected to maintain a good momentum of development. The annual production and sales volume is expected to achieve a growth rate of approximately 15% over the previous year.

Production and sales show steady and rapid growth. After the total output value jumped to a new level of 10 trillion yuan for the first time in 2009, the total output value of the machinery industry hit a record high in 2010. The industry's total industrial output value reached 14,384.681 billion yuan, an increase of 33.93% over the same period of last year. The growth rate increased by 17.86 percentage points over the same period of last year. In the month of December, the industrial output value was 1,48.039 billion yuan, a record high. In 2010, the entire industry achieved a total sales value of 1,405,396 million yuan, an increase of 34.26% year-on-year, an increase of 18.15 percentage points over the same period of the previous year. Looking at the growth rate of production in various months of the year, although the growth rate of the production and sales of the machinery industry in the first 11 months of 2010 showed a monthly decline, the production growth rate in December was slightly higher than that in October and November. Steady and rapid growth. Due to the low growth rate of production and sales in the previous year, the growth rate of production in 2010 was a relatively high year in recent years.

The sales rate of machinery products in 2010 was 97.74%, which was 0.24 percentage points higher than the same period of the previous year, but slightly lower than the national industrial product sales rate (97.93%). Looking at the scale of different enterprises, the maximum sales rate of large-scale enterprises is 98.43%, which is 0.33 percentage points higher than the previous year, 97.51% for medium-sized enterprises, 0.26 percentage points higher than the previous year, and 97.48% for small-scale enterprises, which is 0.18 percentage points higher than the previous year. .

The growth of production in the engineering and machine tool industries highlights that in the machinery industry in 2010, the production in 12 industries showed a growth trend. There are 5 industries with growth rates higher than the industry average, followed by: construction machinery, machine tools, automobiles, mechanical basic parts and internal combustion engine industry. Among them, the production of construction machinery and machine tool industry grew significantly, accumulatively increasing by 48.09% and 40.95% year-on-year, respectively, and the growth rate increased by more than 23% from the previous year. However, the growth rate of production in seven industries is lower than the industry average. These industries are agricultural machinery, instrumentation, cultural office equipment, petrochemical general machinery, heavy mining machinery, electrical appliances, and food packaging machinery industries. The growth rate is above 25%. .

The rapid growth of the output value of new products The total output value of new products completed in 2010 was 272.513 trillion yuan, a year-on-year increase of 33.07%. The output value of new products showed rapid growth, but the output value of new products was the same as that of the previous year, which was 18.92%. From various industries, the output rate of new products in seven industries increased over the previous year, namely, construction machinery, instrumentation, cultural and office equipment, general petrochemical machinery, electrical appliances, mechanical basics, and food packaging machinery industries, and the automotive industry Product output rate has decreased from the previous year. However, from the perspective of contribution rate, the automotive industry contributed the most to the growth of the output value of new products, which was 52.14%; the electrical and electronic appliances industry took the second place, accounting for 19.95%; the construction machinery industry and the petrochemical general industry ranked third and fourth respectively.

The export delivery value showed a recovery growth. In 2010, the export delivery value of the whole industry reached 1.449380 trillion yuan, an increase of 34.32% year-on-year, an increase of 52.85 percentage points over the same period of the previous year (-18.53%), and the overall export delivery value showed an increase. Trends, but the growth rate is slowing month by month. At the same time, the value of export delivery fell by 0.13 percentage points compared with the previous year, of which the industries with large declines were: heavy mining machinery, instrumentation, internal combustion engine, and food packaging machinery industry, with a year-on-year decline of more than 1 percentage point. The industry with the highest value of export delivery in 2010 was the cultural and office industry, which reached 73.37%; the following is 18.99% for the instrumentation industry, 14.26% for the electrical appliance industry, and 10.57% for the petrochemical general industry.

Nearly 90% of the main products increased year-on-year in the 119 kinds of main products reported by the China National Machine Link monthly report, accumulatively 107 products increased year-on-year, accounting for 89.92% of all reported products; of these, products with more than double digits had 85 This accounted for 71.43% of all reported products; cumulatively, there were 11 products that decreased year-on-year, accounting for 9.24% of all reported products. Some of the product output has reached a new level. Details are as follows:

Under the influence of the national agricultural machinery subsidy policy, the output of major agricultural machinery products has grown rapidly, and large-scale tractors, on-site operating machinery, and food processing machinery have grown by more than 30%. In particular, grain processing machinery has grown rapidly, with a year-on-year increase of 50.88%. The year-on-year decline in agricultural machinery products was dedicated equipment for feed production, which fell by 4.26%.

The output of most products in the petrochemical GM industry has increased at different levels compared to the previous year. Products that have maintained growth above 30% include: special equipment for oil refining and chemical production, vacuum pumps, fans, gas compressors, compressors for refrigeration equipment, and oil drilling equipment. Plastic processing equipment and other products, of which oil drilling equipment grew significantly, an increase of 89%. However, the output of gas separation and liquefaction equipment, air pollution control equipment, solid waste treatment equipment, and noise and vibration control equipment have declined in different degrees, and dropped by more than 12% year-on-year.

In 2010, excavation and shovel transportation machinery products maintained rapid growth, among which the excavator and loader grew faster, which was an increase of over 45% year-on-year. Concrete machinery with a lower growth rate is also maintained at more than 9%.