Diamond Lapidary Glass Saw Blade HANS was a professional diamond tools manufacturer. We have superior equipment, self-contained testing systems and strong technical capacity.Our cutting tools, grinding tools and drilling tools are widely used in the processing of stone materials, ceramics, glass, seashell, fire-retardant materials, concrete and asphalt. Through our use of technology, we are dedicated to offering you better diamond tool solutions.
These thin rim sintered diamond saw blades last longer than notched blades.The diamonds (325#/400#) are secured into a metal bond that extends the full depth of the rim. Diamonds are continuously exposed as the edge of the blade wears away cut after cut. They offer a long life and clean, thin cuts. Click to enlarge the image to see a close-up of the diamonds secured in the rim.
Precision Diamond Loop Wire Saw and Equipment in producing non-destructive, non-deforming cut or slice.Application used in cutting precious metals, plastics, quartz, glass, graphite and ceramics are just some of the many natural and synthetic materials that in Research and Development, Quality Control, Failure Analysis and Production.
Diamond Loop Wire Saw is one of the most flexible cutting tools, which can set on the surface of diamond crystals. While cutting, the diamond wire will move from one direction with the speed from 30-60 m/s. It will give users the great advantages. Widely used on cutting the rubber machine and hard surface of materials,such as,tire Section cutting machine,Tyre section cutting machine,artificial crystal (sapphire, silicon),Special Ceramic,Precious metal,graphite and plastic,brittle material. Also used on research field: geology,archaeology,architecture and biology etc. Also supply the diamond loop wire saw for tire section cutting machine.
A) 0.5-1.0mm Diameter application in artificial crystal,gem,ceramic and precious metal etc.
B) 1.0-3mm diameter application in graphite,plastic,rubber,concrete,fiberglass and foamed cement etc. Specification
1. High efficiency on cutting, while the speed from 30 to 60 m/s
2.Diameter from 0.3-3.0 mm,Length from 800-100000 mm and math for the popular machine in current market 3.Cutting fits into both wet or dry environment
4.Cutting directions could change by customer's requirement. And also could apply to cut the curved surface.
5. Operation and Replacement of diamond wire are really convention.
Customized Dimension We had been made:
GX-YLQ-42 Tire Section Cutting Machine wire saw
GX-YLQ-26 Tire Section Cutting Machine wire saw
GX-YLQ-15B Tire Section Cutting Machine wire saw
When place an order Please let us know follows details: Length(mm): Out Diameter(mm): Cutting Materials
Diamond Tire Section Cutting Wire Saw ,Precise Diamond Wire Saw, Foamglass Abrasive Wire Saw, Diamond Loop Wire Saw,Diamond Cutting Saw Blade Hans Superabrasive Material Co., Ltd. , https://www.hansuperabrasive.com
The safety net is classified into flat net (P), vertical net (L), and dense-listed safety net (ML). The safety net is mainly composed of side ropes, tethers, ribs, and net ropes. The dense mesh safety net consists of a net body, a buckle, a side rope and an additional tether. The physical and mechanical properties of safety nets are the main indicators for judging the quality of safety nets. Its content includes: edge rope, tether, net rope, rib rope breaking strength. The dense-mesh safety nets mainly include: breaking strength, elongation at break, tensile strength of joints, tearing strength, penetration resistance, retention of breaking strength after aging, and strong tail-flame-retardant properties of eye-opening buckles. Both flat net and vertical net should have impact resistance. Liteng can not replace flat nets. It should be based on the construction needs and load height to distinguish between flat nets and grids. Flat network load strength requirements greater than the vertical network, more materials used, weight greater than the vertical network. Under normal circumstances, the flat net is larger than 5.5kg, and the vertical net is larger than 2.5kg.
Safety nets mainly use open-air workplaces. Therefore, it must have weather resistance. Weather-resistant materials include nylon, vinylon and polyester. The same material used in the same net should be the same, its wet and dry strength ratio should be greater than 75%, and the total weight of each net should not exceed 15kg. The flame-retardant safety net's continued burning and smoldering time must not exceed 4s.
The width of the flat net is not less than 3m, and the width of the vertical net and dense-mesh safety net is not less than 12m. The length of the tether is not less than 0.8m. Safety net tether and tether spacing should not exceed 0.75m. The distance between the dense-mesh safety net tether and the tether should not be greater than 0.45m, and the distance between the safety net ropes should not be too small, and it is generally specified to be more than 0.3m. Safety nets can be divided into hand-knotted and mechanically-knotted. Mechanical knitting can be divided into knotted and knotless knots. In general, knot-free nodule intensity is higher than that of knotted knots. Net knots and knots must be firmly fixed and must not be moved to avoid enlargement of the mesh and non-uniformity of the length of the edges. The above situation will lead to stress concentration, until the net rope breaks.
Stone industry
Construction industry
Glass industry
Economical Coutinues Rim Blades
These new blades have diamond throughout the edge and cut aggressively. blades also last a long time, because the diamond isn't just plated on top of the rim. Instead, diamond particles are incorporated into the actual metal of the rim. Cut blades up to 10" in diameter work great with water, but we advise using an additive such as Lube Cool 4800. If you use oil, these long-lasting blades will last even longer! Cut blades have a continuous rim.
Precision Sineterd Saw Blades
Precision Continuous Rim Lapidary Blade is a professional quality blade manufactured using a high concentration of premium grade industrial diamonds. These blades will cut faster than regular notched rim blades and the smaller size thin core blades can be used when cutting valuable materials to minimize loss of material. A full diamond sintered blade, The BD 303 blades can be used with rust inhibiting water coolants although oil coolants will result in longer blade life.
Notched Rim Lapidary Blade
Notched Rim Lapidary Blade are excellent quality commerical grade blades, designed for use on hard lapidary materials like agate, jasper, petrified wood, and geodes.More diamonds in the notched rim and a stiffer core make this blade cut faster and provide a long use-life. Covington Gold blades are a great low cost choice for your lapidary saw.
Coarse Cut Notched Blades
COARSE CUT DIAMOND SAW BLADES IF YOU CUT HARD MATERIAL YOU WILL LOVE MY COARSE BLADES
Red Thin Rim Sintered Saw Blade
Safety network inspection equipment to safety network quality inspection
Safety nets are special labor protection articles involving state property and personal safety. The quality of their products must be certified by the state-designated supervision and inspection department after they have passed the safety net test equipment and obtained a safety production license. Each shipment of safety nets must be inspected by the supervision and inspection department. Each safety net shall be attached to the national supervision department inspection certificate and enterprise self-certification certificate at different locations. At the same time, there should be signs, and there should be permanent signs on the signs. The contents of the signs should include: name of the manufacturer, date of manufacture, batch number, material, specifications, weight and production license number.