Introduction: There are many brake motors in the market. How to choose a good brake motor? Buy brake motors, consider the following aspects: Double Wall Corrugated Pipe Production Line
Plastics extrusion is a high-volume manufacturing process in which raw plastic is melted and formed into a continuous profile. With the development of economy, more and more plastics are used in people's daily life. Consequently, a large quantity of plastic extruder, plastic extrusion line, plastic extrusion machine are used to process PP, LLDPE, LDPE, HDPE, PVC, ABS, etc. in pipe extrusion, profile extrusion, filament extrusion, film extrusion, sheet extrusion and pelletizing.
We have focused on plastic machinery over 21 years with rich experience and strong technology .top quality and the turn-key service including installation , test running and training workers in your local factory . we are your trustworthy partner
Plastic Pipe Production Line,Double Wall Corrugated Pipe Machine,Double Wall Corrugated water Pipe Machine,Water Piping Production Line Zhangjiagang Huade Machinery Technology Co.,Ltd , https://www.tophdextruder.com
1. The braking effect of the motor. A good brake must be durable.
2. The speed of the brakes. Currently on the market brake motors have AC brakes and DC brakes. DC brake speed is approximately 0.20-0.30 seconds, AC brake brake speed is 0.002-0.003 seconds. AC brakes are faster because brakes have different brake configurations.
3. The frequency of braking. Some industries have higher requirements for braking, and they need to brake for about 40 minutes a minute. It is difficult for general brake motors to meet the requirements. The main reason is that because of such long-term operation, the brake pads will be very hot, and if the temperature is too high, they will slip. Can cause the brake coil to burn. At present, this requires that the domestic technology is still not reachable and imports are slightly better.
4. Torque of the motor, a good motor, must be sufficient power, torque.
5. Service life: The brake motor can be used in general conditions: 1-8 years, according to the use of customer equipment.
6. Particularity of equipment: Use under harsh conditions: For example, dust, corrosive, water intrusion, etc. This is determined by the degree of protection of the motor itself.