Stainless Steel Twilled Weave Mesh
Twilled weave means Wire Cloth in which
each warp wire and each shute wire passes successively over and under
the two adjacent wires -- in both the warp and shute directions. This
over and under movement is shifted one wire with each pass of the
shuttle. This pattern permits the weaving of heavier wires in varying
meshes.
Materials:SS 302, SS 304, SS 304L, SS 316, SS 316L, SS 321 and SS 430 etc.
Features
Stainless steel twilled weave wire
mesh have the features of wear resistance, heat-resisting,
acid-resisting, alkali resisting, durable structure, and corrosion
resistance.
Meantime stainless steel woven mesh also have high temperature resistance, good electric conductivity and washing resistance.
Application:
Stainless steel woven wire mesh is widly
used in mining, petroleum, chemical industry, food industry ,
pharmaceutical industry and sifting and screening mesh in chemical and
chemical fiber industry.
Roll Width: 36", 40", 48", 60"
Roll Length: 25Ft, 50Ft and 100Ft
Stainless Steel Twilled Weave Mesh,Dutch Twilled Weave Mesh,Stainless Steel Wire Rope Mesh,Twill Stainless Steel Wire Mesh ANPING KINDELONG WIRE MESH CO.,LTD. , https://www.wire-mesh.org
Valve assembly technical requirements are what
Valve is a common type of hardware products, the valve before assembly and assembly process is also a certain technical requirements, or assembled out of the valve can not reflect its own excellent performance, the valve in the assembly process which Technical requirements? Valve assembly pre-processing requirements: 1, according to processing requirements, some parts need to be polished, the surface can not have processing burr; 2, all parts are degreased; 3, after degreasing pickling passivation, cleaning agent is not Phosphorus; 4, pickling decontamination rinse with pure water, can not have residual agents, carbon steel parts omitted this step; 5, one by one with a non-woven fabric to dry, Or dry with clean nitrogen; 6, with a non-woven or precision filter paper stains on alcohol-by-component wipe clean parts, until there is no dirty color. Valve assembly technical requirements: 1, the installation workshop must ensure clean, or to build temporary clean area, for example, with the newly purchased color bar cloth or plastic film, etc., to prevent dust in the installation process. 2, the assembly workers must be wearing clean cotton overalls, wearing a cotton cap, the hair can not be leaked, wearing clean shoes, hand wearing plastic gloves, degreasing. 3, assembly tools must be degreasing cleaning before assembly to ensure clean.