Water-type constant temperature incubator use instructions and precautions I. Structure Overview Second, the use of instructions Chaff Cutter,Chaff Cutter Machine,Electric Chaff Cutter,Mini Chaff Cutter Hunan Nongyou Machinery Group CO.,LTD , http://www.harvesterequipment.com
The water-removal incubator uses the water in the water tank, and after being heated by electricity, it conducts to the inner room to increase the temperature of the tank and indirectly heat the inside of the box. The temperature rises and falls is more direct type, and the air heating is slow, which is extremely suitable for Bacterial culture etc.
The shell of the box is welded with thin steel plates. The inner and outer layers of the water tank are made of copper skin. The insulating layer filled with glass wool has good thermal insulation performance. The outer drying hammer paint and parts are all chrome-plated.
The incubator is equipped with double doors, and the inner door is fitted with a glass door and a box door frame to facilitate the observation of test objects. Electrical parts, all installed in the left side of the box, are convenient for inspection and replacement of parts.
The automatic temperature control element is coiled into a spiral shape with a bimetallic strip, extends into the box, and is fitted with a protective tube. Its sensitivity is within ±0.5 °C and 20 - 60 °C. Incubator heated or thermostated with red and green indicators.
1 . After the test article is placed in the incubator, the glass door and the outer door are closed, and the top air door on the box top is properly unscrewed.
2 . Before heating without electricity, the water must be added first, and when the water is added, the funnel is used to insert the water into the pipe and enter it until the buoy indicates “ stop water †.
3 . When using, the sensor probe should prevent the hard object from touching and colliding with the sensor probe to avoid damage.
4 . Turn on the power and turn on the power switch.
5 . Temperature setting: Push setting, measurement button switch, rotation setting selection button, setting the desired temperature value, setting is complete, and then click the setting, measurement button switch to make it out of the box. measure temperature.
6 . Please refer to the instructions for the temperature controller for detailed instructions on using the temperature controller.
Third, pay attention to matters
1 . The operating voltage is 220V , 50HZ .
2 . When using electricity, avoid touching the electrical parts inside the space on the left side of the box, or wipe with a damp cloth and rinse with water.
3 . The power cord must not be wrapped around metal or placed in a damp place. Rubber aging and leakage must be prevented.
4 . Test objects placed in the box should not be overcrowded, so that the air flow, keep the average heat inside the box.
5 . After each use, the power supply should be turned off, and the discharge faucet installed on the lower right side should be opened to store water. In the second use, warm water should be added.