Marine Incinerator / Solid Waste Incinerator

May 28, 2025

Model NO.: GRINC-18
Working Temperature: 850~1150
Negative Pressure: 5-35 mm Wc
Electrical Power: 7kw
Total Weight: 1500kg
Certificate: Uscg/CCS/RS
Warranty: 3 Years
Trademark: Gathering
Transport Package: Standard Package
Specification: 180000Kcal/H, 22.5kg/h
Origin: China
HS Code: 8417809090
Marine Incinerator / Solid Waste Incinerator

Description :
The Gathering marine incinerator, which is designed for on board incineration of ship's waste oil and solid, it mainly consists of four parts: 
A. Combustion chamber with diesel oil burner, sludge burner, and electric control panel. 
B. Flue gas fan 
C. Flue gas damper. 
D. Sludge tank with circulating pump and heater. 

Details: 
The incinerator is equipped with single door in front, which are intended for loading 
Of solid waste and ash removing, the incinerator in stand-by mode(COM. Tem. Less than 220° C), the doors can be opened properly. If the incinerator is running in cooling down mode, the door can be opened till COM. Tem. Less than 100° C and incinerator fully stop. 

The electrical control panel is installed on the incinerator and it contains fuses, starters, PLC and 
Operator panel. The electric panel is built according to international standards for marine equipment. 

The operator panel which is located at the right side of the control panel has a touch screen and 
Defined keys for system starting/stopping and selecting burner modes. The burning process is controlled by the PLC and monitored by the HMI(human machine interface)and scanned by a photo resistor. The combustion chamber temperatures are also regulated automatically by the PLC control system.

Technical Data:

Type		 HY INC-18  
Capacity 180,000 kcal/h ( 208KW)
22.5 kg/h IMO sludge oil
14,4000Kcal/h solid waste		 IMO sludge (20% water content) IMO class 02 solid waste
Combustion chamber temperature Max.           1180 8C Working        850-1150 8 C  
Flue gas temperature Max.            375 8C Working         250-340 8 C  
Surface temperature Less than ambient temperature +20 8 C , and less than 60°C  
Electrical power Consumption 7kW  
Negative pressure 5-35 mm WC Negative pressure in combustion chamber
Total weight 1500 kg  
Outline dimension   See dimension drawing (APPENDIX)
 

 

Boiler Headers

Boiler Header PipeBoiler Steam header is the main supporting equipment of the boiler to distribute the steam generated by the boiler operation to various pipelines, it also serves as a reservoir that feeds steam to the individual heating circuits. The boiler steam header must be large enough to virtually eliminate pressure drop between the boiler and the beginning of the circuit.


Steam header belongs to the category of pressure vessel, its pressure capacity, volume should be corresponding to the supporting boiler. The main compression elements are head, housing, etc.

Boiler Manifold Headers,Oil Boiler Parts ,Boiler Steam Header,Gas Boiler Parts

Jinan Yuanda Power Equipment Co.,Ltd. , https://www.ydpowerequipment.com