It is now spring and it will soon be turned into the rainy season. Many basements, housing floors, warehouses, medicine warehouses, electronics factories, and freezers all need dehumidifiers to remove moisture all year round. In addition to the demand for industrial dehumidifiers in other areas of domestic dehumidifiers, there is still a large demand, but it is also very important for consumers to pick a satisfactory product. Today, Xiao Bian has listed eight experiences of purchasing dehumidifiers here. You can use it as a reference for purchasing dehumidifiers to ensure their quality.
First, the appearance of inspection. View the various parts of the dehumidifier, whether it is a fine workmanship, and whether the surface of the plastic parts is smooth and even in color. The surface of the electroplated part should be smooth and there should be no defects such as peeling, exposed bottom, scratches, and the like.
Second, the wind deflector inspection: The air deflector should be able to move up and down or right and left, can not be too tight, but can not be too loose, should be allocated in any position can be positioned, should not automatically shift
Third, the filter is often dismantled parts, it should check whether the disassembly is convenient, there is no damage and so on.
Fourth, the check of the function keys, knob The knob on the dehumidifier panel should be flexible, place, not loose, do not slide. Computer-controlled dehumidifier function selection buttons are light and flexible and must not have card keys.
Fifth, power check. For an integral type dehumidifier, power can be checked to check the heating: In the winter or when the temperature is low, the dehumidifier can be purchased, and the hot air function can be trial-produced. After a few minutes of power supply, hot air should come out.
Six, noise and vibration inspection. When the dehumidifier is in the dehumidifying motion, it cannot have abnormal noise such as impact noise, and the vibration cannot be too large.
Seven, electrical performance inspection. Check whether the power cord and power plug comply with the specifications. Pull the power cord by force and do not loosen or pull it out. If conditional, the cold insulation resistance of the dehumidifier can be measured.
Eight, annex, technical documents inspection. Should check the specification, certificate, warranty card, packing list and other technical documents are complete, according to the packing list to check whether the annex is complete.
Jinzhong Group is is drafter of national standard GB/T21489-2018 [bulk truck unloading devices".
Hydraulic Dumper is one device for automatic unloading truck with bulk material loading and without dumping function, and is also called as [bulk truck unloading device". The equipment is widely used in units and departments with bulk materials such as grain, oil, food, sugar, coal, building material, chemical, metallurgy, mine and port.Hydraulic dumper improves production efficiency, saves manual unloading cost, and creates good economic benefit for the users.