Are you unsure how to change the oil in your Toyota Corolla? Follow along with this guide!

Before starting, ensure you're working on a flat, stable surface. A clean and well-lit workspace is crucial. Make sure you've got the right tools, such as a socket set and an oil filter socket. Additionally, gather everything you'll need for the oil change:

• An oil collection pan
• Four quarts of oil
• A new oil filter
• A funnel
• Rags for cleaning up

There’s been some debate about how frequently you should change your oil. Traditionally, it was recommended every 3,000 miles or three months. However, Toyota suggests changing the oil every six months or 5,000 miles unless you're using 0W-20 synthetic oil, which can last up to a year or 10,000 miles. Regardless of which timeline you choose, consistency is key.

How to Change the Oil in Your Corolla

To change the oil, follow these steps:

1. Locate the drain plug beneath your Corolla's engine. It’s positioned directly below the engine.
2. Position your oil collection pan under the drain plug. Use a 14-mm socket and a socket wrench to loosen the plug.
3. Oil should begin to flow out. To speed up the process, fully loosen and remove the plug once it starts draining.
4. Once the old oil has drained completely, locate the oil filter.
5. Using an oil filter socket and wrench or removal tool, carefully take off the oil filter.
6. Pour the remaining oil from the filter into the pan and let any leftover oil drain out.
7. Use a clean rag to wipe around the oil filter mounting point on the engine block.
8. Take another clean rag, apply a bit of fresh oil to it, and gently lubricate the edges of the new oil filter before installing it.
9. Reinstall the new oil filter by reversing the removal process.
10. Put the drain plug back into place and tighten it securely without overdoing it.
11. Open the hood and locate the oil cap on top of the engine. Slowly pour in 3.5 to 4 quarts of fresh oil, taking care not to overfill or spill.
12. After filling, check the dipstick to confirm the correct oil level.

Finally, reset the maintenance light. To do this, turn the key to the ACC position (accessory mode). Set your odometer to display mileage rather than trip distance, then turn the key off. Press and hold the button used to toggle between trip and mileage modes, then turn the key back to ACC. You should see the light blinking while holding the button down.

Congratulations! Your oil change is now complete.

For more tips and tricks on maintaining your Toyota, check out related posts below:

Remember, regular maintenance is essential for keeping your vehicle running smoothly and extending its lifespan. If you're ever unsure, don't hesitate to consult a professional mechanic.

Flow Control Valve

Flow Control Valve,Solenoid Flow Control Valve,Hydraulic Flow Control Valves,Flow Valve

Shanghai Jinhai Hydraulic Co.,Ltd , https://www.shanghaijinhai.com